P250D
Engine Oil Level Sensor Circuit High
P250D is stored when the oil level sensor line rises above its valid range. The usual explanation is contact with a positive conductor; with pull-up inputs an interrupted line or missing sensor ground can also drive the signal high. Deutz gives the clearest definition: its EMR controller files P250D-00 as the level sensor shorted to battery. Ford lists P250D in the 2014 BOSS 302S engine code table. No passenger-car maker has published thresholds or a service bulletin for this code. A reading stuck high can mimic a full sump, so a real oil loss might go unreported until P250F logic or the oil pressure switch reacts. The low counterpart is P250C, the erratic one P250E, the generic circuit code P250A.
Possible causes
- Signal wire shorted to supply voltage high
- Sensor ground open or signal line interrupted medium
- Sensor electronics faulty low
Symptoms
- Oil level warning or message
- Level display permanently at maximum
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P250D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.