OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2504

Charging System Voltage High

P2504 is logged when the charging output overshoots: the measured voltage rises above what the module asked the generator to produce. FCA names it Charging System Output High and publishes several cases. A 2021 Ram 1500 lit the check engine lamp after a repair, with P2504 set and P2503 stored, and the advice was to voltage-drop every circuit involved. On a 2022 Ram 1500 that would not crank, the cause was the N1 connection at the high-current fuse array plus poor grounds from battery to body and from body to engine. The Durango bulletin treats P2504 alongside P2503 and the loose B+ post. Poor connections fool the measurement, so a sound alternator can be blamed. P0563 differs: it rates the module supply. Real overcharging can boil the battery and damage electronics.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number5 / 04

Possible causes

  • High resistance at B+ fuse array or ground straps distorting the reading high
  • Regulator stuck and overcharging medium
  • Battery current or voltage sensor delivering wrong values low

Symptoms

  • Check engine lamp, sometimes battery lamp
  • Very bright lights, bulbs failing early
  • No crank in connection-related cases

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2504

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication