P24E1
NH3 Sensor Circuit
An NH3 sensor behind the SCR catalyst measures ammonia that slipped through unused, letting the controller trim dosing and detect overdosing or an aged catalyst. P24E1 is the general circuit code for this sensor: its signal is missing, implausible or erratic. Deutz lists P24E1 for its MD1 engine controller with SPN 4377 and FMI 2, i.e. unstable or wrong data. For the 2014 Ram 3500 to 5500 chassis cab with the 6.7 L Cummins, bulletin 18-042-20 offers two calibrations: one for trucks still equipped with the sensor, the other for trucks from which it has been taken off. CARB's heavy-duty rules require SCR sensors to be checked for circuit faults and rationality. Range, low, high and intermittent faults are P24E2 to P24E5; a lost CAN link to the sensor is U02A4.
Possible causes
- NH3 sensor element or its electronics failed from heat and age high
- Heat-damaged wiring or connector near the exhaust medium
- Software calibration issue, update available on some engines low
Symptoms
- Malfunction indicator lamp on
- Less precise DEF dosing, possible ammonia smell or higher NOx
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P24E1
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.