P24E0
Reductant Purge Control Valve B Stuck Closed
Stuck closed means purge valve B does not move into its emptying position when commanded after shut-down, so the line it serves stays filled with fluid under residual pressure. In normal dosing this goes unnoticed; the risk appears in frost, when the trapped DEF freezes in hose, pump or injector and can crack them. No manufacturer documents P24E0 publicly. How a blocked valve A is detected on GM's Duramax diesel: the pressure drop during the purge phase is measured, and less than 50 kPa sets P20A1, Type A. Pico's Denoxtronic 2.2 description shows that the purge relies on the reversing valve and the closed injector to create vacuum. CARB demands monitoring of SCR components. P24DF is the reverse failure.
Possible causes
- Valve B seized by crystallised DEF or corrosion high
- Weak coil that no longer pulls the valve over medium
- Intermittent open in the control circuit during shut-down low
Symptoms
- Malfunction indicator lamp on
- Frozen or burst DEF line or injector after frost
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P24E0
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.