OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P24E0

Reductant Purge Control Valve B Stuck Closed

Stuck closed means purge valve B does not move into its emptying position when commanded after shut-down, so the line it serves stays filled with fluid under residual pressure. In normal dosing this goes unnoticed; the risk appears in frost, when the trapped DEF freezes in hose, pump or injector and can crack them. No manufacturer documents P24E0 publicly. How a blocked valve A is detected on GM's Duramax diesel: the pressure drop during the purge phase is measured, and less than 50 kPa sets P20A1, Type A. Pico's Denoxtronic 2.2 description shows that the purge relies on the reversing valve and the closed injector to create vacuum. CARB demands monitoring of SCR components. P24DF is the reverse failure.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number4 / E0

Possible causes

  • Valve B seized by crystallised DEF or corrosion high
  • Weak coil that no longer pulls the valve over medium
  • Intermittent open in the control circuit during shut-down low

Symptoms

  • Malfunction indicator lamp on
  • Frozen or burst DEF line or injector after frost

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P24E0

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication