OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P24DF

Reductant Purge Control Valve B Stuck Open

Stuck open means purge valve B remains in, or leaks toward, its emptying position while the system should be dosing. Part of the pump flow then goes back to the tank, so working pressure builds slowly, drops quickly when the pump stops, or needs a high pump duty to hold. No manufacturer documents P24DF publicly, and the public GM tables cover only the opposite failure of valve A (no pressure drop in purge, P20A1). The Denoxtronic 2.2 layout described by Pico explains the mechanism: one 4/2-way valve decides whether the pump feeds the injector or sucks the line empty, so a valve hanging halfway shortcuts the pressure side. CARB requires SCR delivery faults to be detected before emissions rise. P24E0 is the opposite fault; P24DC the general function test.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number4 / DF

Possible causes

  • Internal leak or worn seat in purge valve B high
  • DEF crystals preventing the valve from returning to dosing position medium
  • Control circuit fault keeping the valve energised low

Symptoms

  • Malfunction indicator lamp on
  • DEF pressure too low, reduced dosing and rising NOx
  • Warnings about reduced SCR function, possibly later engine power limits

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P24DF

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication