OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P24DD

Reductant Purge Control Valve B Circuit Low

P24DD means the control line of purge valve B shows too little voltage at a moment when it should be high. With the low-side switching that GM uses for valve A, this is checked while the driver is off: the line should then carry battery voltage through the coil, and a low reading indicates a short to ground between valve and controller, so the valve may sit energised permanently. No manufacturer documents P24DD publicly; The valve A counterpart, P20A2, appears in GM's diesel tables for the 6.6 L engine. CARB's heavy-duty rules require detection of such circuit faults on SCR actuators. Typical spots are chafed wires near the tank and a coil that shorts to its housing. The opposite case is P24DE, an interruption P24DB.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number4 / DD

Possible causes

  • Control wire chafed to ground near tank or frame high
  • Valve coil shorted to its housing medium
  • Water or DEF in the connector low

Symptoms

  • Malfunction indicator lamp on
  • Valve may remain in purge position, dosing pressure not reached

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P24DD

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication