P24D9
EVAP System Pressure Sensor/Switch B Circuit Intermittent
P24D9 covers a sensor B signal that keeps flickering instead of failing outright. Mitsubishi's 2023 Outlander PHEV runs this check once per drive cycle inside the parked leak test, when the controller wakes at its scheduled times and coolant and intake air lie between 4 and 35 °C. It counts how often the tank pressure signal crosses the sensor's own filter value and stores the code after more than 20 crossings; the display then asks for a refuelling-system service. The service hints name the tank pressure sensor, the tank differential pressure sensor and their wiring. Shaking the harness while watching live data often reveals the spot. Steady low or high voltages fall under P24D7 or P24D8, implausible but stable readings under P24D6.
Possible causes
- Loose terminal or poor contact at the tank pressure sensor high
- Harness chafed along the fuel tank medium
- Tank pressure or tank differential pressure sensor unstable medium
Symptoms
- Malfunction indicator lamp on
- Refuelling system service message on the display
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P24D9
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.