P24D5
EVAP System Pressure Sensor/Switch B Circuit
P24D5 is the general circuit code for a second EVAP pressure sensor, called B to tell it apart from the main sensor A (P0450 range). Which sensor is B depends on the maker: Mitsubishi's 2023 Outlander PHEV uses it for an absolute fuel tank pressure sensor on its sealed tank, GM for a canister vapour pressure sensor, and Audi's bulletin 2069531 assigns sensor 2 to the G950 part in the purge path. No manufacturer documents P24D5 itself publicly; all three use the more specific P24D6 to P24D8. CARB requires circuit checks on every EVAP input. A stored P24D5 suggests a fault in the 5 V reference, ground or signal wire of that sensor; until it is fixed the leak or purge diagnostics depending on it are blocked.
Possible causes
- Open or shorted reference, ground or signal wire of sensor B high
- Loose or corroded connector at sensor B medium
- EVAP pressure sensor B failed medium
Symptoms
- Malfunction indicator lamp on
- EVAP readiness monitor incomplete
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P24D5
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.