P24D4
EGR Cooler Coolant Pump Feedback Circuit
Where an electric auxiliary pump moves coolant through the EGR cooler, the pump usually reports back to the engine controller on a separate wire, for example with a speed or status signal. P24D4 is the general fault of that feedback circuit: the signal is missing or cannot be interpreted, while the narrower cases of a line stuck below or above its band are P24AC and P24AD. The drive side may be fine; faults in the control line are P24A7 to P24AA. No manufacturer documents P24D4 publicly. CARB requires the controller to check inputs from emission-related components for circuit faults and rationality. Pierburg describes EGR coolers as part of the coolant circuit. Without valid feedback the controller cannot prove the cooler is supplied and may cut back EGR to protect it.
Possible causes
- Open feedback wire or loose connector at the pump high
- Failed pump electronics no longer sending a status signal medium
- Blown fuse or failed relay leaving the pump without power medium
Symptoms
- Malfunction indicator lamp on
- EGR reduced, possibly higher NOx and changed engine noise
- Coolant temperature warnings if the pump really stops
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P24D4
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.