P24C7
Particulate Matter Sensor Temperature Circuit Range/Performance
P24C7 checks whether the temperature the particulate matter sensor reports fits the exhaust around it. Ford's 2023 diesel summary does an offset test after a cold soak of at least 6 hours, flagging more than 45 °C against the mean of the exhaust temperature sensors, and a dynamic test while driving that fails below -150 or above 60 °C against a model. VW's 2014 Touareg list uses 60 K and -100 K. GM's 18OBDG04 table sets it at more than 100 °C deviation in 200 of 250 samples (Type B) and names a damaged sensor or extra harness resistance as causes. Mazda treats it as a two-cycle code on the CX-5 SKYACTIV-D 2.2 (01-005-22); Ford 18-2225 and GM coverage 16018 replace the sensor. P24C6 is the electrical fault.
Possible causes
- Sensor element damaged or temperature track drifted high
- Extra resistance between sensor and sensor control unit medium
- Faulty exhaust temperature sensor used as reference low
Symptoms
- Malfunction indicator lamp on
- Particulate filter monitor does not complete
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P24C7
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- fordservicecontent.com/Ford_Content/catalog/motorcraft/obd-summary-diesel-2023.pdf
- static.nhtsa.gov/odi/tsbs/2014/MC-10074008-2280.pdf
- gsi.ext.gm.com/gmspo/mode6/pdf/2018/18OBDG04 Engine Diagnostics.pdf
- static.nhtsa.gov/odi/tsbs/2022/MC-10215261-0001.pdf
- static.nhtsa.gov/odi/tsbs/2018/MC-10153928-9999.pdf
- static.nhtsa.gov/odi/tsbs/2016/MC-10130682-9999.pdf