OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P24C4

EGR Cooler Bypass Position Sensor Exceeded Learning Limit Bank 1

The bypass flap of the EGR cooler learns its end stops, and P24C4 means the learned values for bank 1 have left the window the software accepts. GM's diesel tables from 2017 on run the learning after key-off with coolant between 70 and 129 °C: the raw signal must lie between 16 and 24 % of 5 V in cooling position and between 72 and 85 % in bypass position; outside, the code is stored as Type B. GM's 2014 table 14OBDG10 instead judges the spread of the learned offsets (over 50 %) and a single offset beyond about ±16 %. Bulletin PI1449 for the 2015 Silverado and Sierra with the LML Duramax pairs it with P2493, P2495 and P06A3 and calls for a complete new bypass valve. Pure circuit faults are P2494/P2495; bank 2 reports P24C5.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number4 / C4

Possible causes

  • Worn bypass valve whose integrated position sensor no longer reaches its learned values high
  • Soot deposits shifting the end stops of the flap medium
  • Signal offset from connector corrosion or a weak 5 V reference medium
  • Learning repeatedly cut short because the controller is woken right after key-off low

Symptoms

  • Malfunction indicator lamp on after the second trip
  • Reduced EGR cooling, higher NOx output
  • Often no change in driveability

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P24C4

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication