P24C3
Exhaust Gas Temperature Measurement System - Multiple Sensor Correlation Bank 2
P24C3 is the bank 2 counterpart of P24C2 and only makes sense on engines whose two cylinder banks feed separate exhaust strings, each with its own set of temperature probes. The controller has found that the probes of the second string disagree among themselves beyond what the operating state allows. No manufacturer documents P24C3 publicly. Ford's 2023 diesel summary shows how such a group check works for bank 1: a key-on comparison after a long soak and a model comparison while driving, each probe weighed against the others. CARB requires that temperature sensors used for aftertreatment control be checked for rationality. The individual bank 2 probes have their own codes P2082, P2086, P2467 and P2474. A test with all probes cold after an overnight stop usually shows the outlier.
Possible causes
- One bank 2 temperature probe has drifted and no longer matches the others high
- Contact resistance in a bank 2 probe connector or harness medium
- Exhaust leak near one probe cooling its tip low
Symptoms
- Malfunction indicator lamp on
- Particulate filter regeneration may be inhibited
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P24C3
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.