P24BF
EVAP System Leak Detection Pump Switching Valve Control Circuit High
P24BF flags too much current in the switching valve circuit while the valve is energised. Mitsubishi's 2023 Outlander PHEV measures coil current through its low-side driver and sets the code when it reaches 2 A or more for 2 s with the valve commanded on. Such a value suggests a shorted coil or a control wire that touches battery voltage, so the driver is effectively feeding a dead short. The engine computer then blocks purge, keeps the fuel door locked and asks for a refuelling-system service. Check the wire between module and ECM for chafing before condemning the module, which carries pump, valve and sensor in one housing. The opposite electrical fault is P24BE; a valve that switches but does not seal is P24C0 or P24C1.
Possible causes
- Switching valve coil shorted inside the module high
- Control wire shorted to battery voltage medium
- Output driver in the engine control module faulty low
Symptoms
- Malfunction indicator lamp on
- Fuel filler door stays locked
- Canister purge switched off
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P24BF
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.