P24B7
Particulate Matter Sensor Heater Resistance
P24B7 concerns the resistance of the heater element in the particulate matter sensor, which drifts as the platinum track ages. Ford's 2023 diesel summary measures it once per drive right after key-on, with the sensor between -30 and 150 °C, and sets the code if resistance leaves 1.06 to 2.93 Ω at the cold end or 1.81 to 4.12 Ω at the warm end. GM's 14OBDG04 table runs a similar heater self-test after power-up and treats a calculated resistance above roughly 2.93 to 4.13 Ω as an aged heater, Type B. An out-of-range heater may still switch, but it cannot reliably reach the temperature for burning off soot. P24B3, P24B5 and P24B6 are circuit faults; P24D1 shows the effect when regeneration does not finish.
Possible causes
- Heater track aged, resistance drifted high
- Corroded connector adding resistance medium
- Wrong sensor temperature distorting the expected value low
Symptoms
- Malfunction indicator lamp on
- Sensor regeneration may stay incomplete
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P24B7
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.