P24B1
Particulate Matter Sensor Circuit High
P24B1 reports the electrode side of the particulate matter sensor reading high, which usually points to a short to a voltage source or to a soaked, conductive element. Ford's 2023 diesel summary sets it when electrode current exceeds 41 µA for about 3 s during measurement. GM's 18OBDG04 table looks for an electrode supply reading above 4.1 V in the sensor control unit (30 of 60 samples, Type B), and VW's 2014 Touareg list uses 0 V or more than 4.1 V. Mazda bulletin 01-005-22 for the 2018–2019 CX-5 SKYACTIV-D 2.2 blames condensate on the element and raised detection from one to two drive cycles. Ford 18-2225 replaces the sensor on 2017–2018 Super Duty 6.7L trucks. P24B0 is the low counterpart.
Possible causes
- Condensate on the sensor element making it conductive high
- Electrode line shorted to a voltage source medium
- Internal sensor fault, replacement sensor needed medium
- Control software needing an update low
Symptoms
- Malfunction indicator lamp on
- Particulate filter monitor does not complete
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P24B1
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- fordservicecontent.com/Ford_Content/catalog/motorcraft/obd-summary-diesel-2023.pdf
- gsi.ext.gm.com/gmspo/mode6/pdf/2018/18OBDG04 Engine Diagnostics.pdf
- static.nhtsa.gov/odi/tsbs/2014/MC-10074008-2280.pdf
- static.nhtsa.gov/odi/tsbs/2022/MC-10215261-0001.pdf
- static.nhtsa.gov/odi/tsbs/2018/MC-10153928-9999.pdf