P24B0
Particulate Matter Sensor Circuit Low
P24B0 flags an electrode signal of the particulate matter sensor that sits too low, typically an open line or a cracked element that no longer conducts as expected. Ford's 2023 diesel summary watches the electrode supply continuously while the sensor measures and sets the code when it drops below 41.55 V for about 1.6 s. In GM's 18OBDG04 table the check runs during sensor regeneration at 600 to 820 °C, compares raw electrode current at two set temperatures and is Type B. VW's 2014 Touareg list ties the code to an electrode current above 5 µA. The code also shows up in FCA bulletin 18-008-23, a PCM update for the 2019 Compass diesel. P24B1 is the high side, P24AE the general electrode fault. Without a working sensor the filter monitor cannot run.
Possible causes
- Sensor element cracked or electrode interrupted high
- Open electrode line between sensor and sensor control unit medium
- Sensor control unit cannot supply the electrode voltage low
Symptoms
- Malfunction indicator lamp on
- Particulate filter monitor does not complete
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P24B0
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.