P24AF
Particulate Matter Sensor Circuit Range/Performance
P24AF tests whether the particulate matter sensor behaves plausibly while it burns itself clean. During that heated phase the electrodes must show a small but definite current, and the heater must change the signal in an expected way. Ford's 2023 diesel summary sets P24AF when the current during sensor regeneration at 770 to 800 °C stays below 0.094 µA, judged over 120 s. VW's 2014 Touareg list uses the code when the accumulated change in heater voltage is no more than 0.25 V. A sensor that no longer reacts cannot detect a cracked or removed filter, which is why CARB requires this check. GM handled P24AF together with P24AE on 2014 and 2015 Cruze diesels under special coverage 16018. P24AE is the electrode circuit fault, P24B3 the heater circuit.
Possible causes
- Sensor element aged or glazed, no longer responding high
- Sensor heater weak so the regeneration temperature is not reached medium
- Element cracked by condensate after cold start medium
Symptoms
- Malfunction indicator lamp on
- Often no change in driveability
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P24AF
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.