P24AE
Particulate Matter Sensor Circuit
The resistive particulate matter sensor behind the diesel particulate filter collects soot on interlocking electrodes; a rising current between them shows that particles are leaking through the filter. P24AE covers a fault in that electrode circuit. Ford's 2023 diesel summary checks it after each sensor regeneration at 200 to 425 °C over 120 s and sets the code if more than 5 µA still flows although the electrodes should be clean. VW's 2014 Touareg list ties P24AE to the electrode voltage leaving 0.30 to 4.70 V and to a functional check with too little or too unchanged measuring current. Special coverage 16018 from GM extended the warranty for Cruze 2.0 diesel sensors of model years 2014–2015 that set P24AE or P24AF after contamination or moisture damage. P24AF is the plausibility check during sensor regeneration.
Possible causes
- Sensor element contaminated or damaged by moisture high
- Harness or connector to the sensor control unit damaged by heat or water medium
- Fault in the separate sensor control unit low
Symptoms
- Malfunction indicator lamp on
- Filter efficiency monitor cannot complete
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P24AE
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.