P24AC
EGR Cooler Coolant Pump Feedback Circuit Low
Electronically commutated coolant pumps often report their state back to the controller on a separate feedback wire, typically as a speed or diagnostic signal. P24AC means that this return line sits below its valid range: shorted to ground, pulled down by a damaged pump, or permanently in an error level the pump uses to signal a dry run or blockage. The control side can be healthy at the same time, which separates it from P24A9. Signal limits are not disclosed by any maker; CARB's rules on rationality and range checks of inputs serve as the reference. Because the controller can no longer confirm pump operation, it may treat the EGR cooler as unprotected and limit EGR.
Possible causes
- Feedback wire shorted to ground high
- Pump signalling an internal fault, dry run or blockage medium
- Corroded feedback pin in the connector low
Symptoms
- Malfunction indicator lamp on
- EGR possibly reduced
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P24AC
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.