P24AA
EGR Cooler Coolant Pump Control Circuit High
With P24AA the controller finds the control line of the EGR cooler coolant pump at a higher voltage than its switching state allows. The classic causes are a short circuit toward battery voltage, for example where the harness rubs against a powered wire, moisture in the connector, or a pump that no longer draws current so the line floats up. On some designs an open circuit can look like a high signal, so P24A7 and P24AA may appear together. Manufacturer limits are not public; the general CARB duty to watch actuator wiring plus supplier background on the cooler support this text. Measuring supply, ground and control voltage with the connector plugged in usually separates a wiring fault from a failed pump.
Possible causes
- Control wire shorted to a battery voltage feed high
- Water or corrosion in the pump connector medium
- Pump electronics failed so no current is drawn medium
Symptoms
- Malfunction indicator lamp on
- Pump may not run when commanded
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P24AA
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.