OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P24A5

EGR Cooler Bypass Control Stuck/Open (Bank 1)

P24A5 means the bank 1 cooler bypass is mechanically stuck, and makers read that in both directions. GM's 2017 Duramax DC-motor flap is judged stuck in bypass if the position is still above 15 % after P245B; the 2018 vacuum version is moved between both modes and fails when the gas temperature after the cooler barely reacts, both Type B. Ford's 2013 and 2015 diesel summaries use it as an overcooling test on the 6.7 L and 3.2 L: with the flap commanded to cooling, gas after the cooler stays below a coolant-based limit for 12 seconds, a sign the flap sits in cooling. Ford traced early cases on 2016–17 Transit 3.2 L vans (TSB 17-0009) to a wrong EGR cooler; Ram reflashed 2014 6.7 L Cummins trucks to cut needless lamps (18-053-14). Bank 2 is P24A6.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number4 / A5

Possible causes

  • Bypass flap seized by soot and carbon deposits high
  • Actuator, linkage or vacuum supply no longer moving the flap medium
  • Incorrect EGR cooler fitted at the factory low
  • Engine software that sets the fault too readily low

Symptoms

  • Check engine light on
  • Slow warm-up or more soot when the flap is stuck in cooling
  • Higher NOx and EGR gas temperatures when stuck in bypass

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P24A5

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication