OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P24A4

Particulate Filter Restriction - Soot Accumulation Too High (Bank 1)

P24A4 marks the critical stage for the bank 1 filter: the soot load is so high that a normal regeneration risks overheating and cracking the substrate. Deutz names P24A4-00 a critical soot load. GM's 2016 and 2018 diesel tables use P24A4 for a clogged filter that has to be replaced, judged from the filtered flow resistance derived from differential pressure, 5 failures in 10 samples, Type A with one trip; the 2018 table labels the line ash accumulation, so GM appears to use the code for a load no regeneration can remove. P2463 is the earlier soot warning, P242F the separate ash code. Many engines then reduce power and block automatic regeneration, so only a controlled service regeneration, cleaning or a new filter will help.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number4 / A4

Possible causes

  • Earlier soot warnings or failed regenerations not dealt with high
  • Excess soot from injectors, EGR valve or turbocharger faults medium
  • Filter saturated with ash at end of service life medium
  • Differential pressure measurement reading falsely high low

Symptoms

  • Marked loss of power, limp mode
  • Automatic regeneration no longer runs
  • Malfunction indicator and filter warning lamp on

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P24A4

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication