OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P24A3

Particulate Filter Restriction - Soot Accumulation (Bank 2)

P24A3 is the bank 2 entry for a particulate filter whose soot load, estimated from differential pressure, exhaust flow and a soot model, has climbed to the point where it noticeably restricts flow and needs a regeneration. It only appears on engines with two separate filter strands, such as some V engines. Public manufacturer documentation for this exact code is missing (the NHTSA bulletin index has no hit either), so this text leans on CARB's filter-clogging requirement and on the bank 1 equivalent P2463, which Deutz lists as a high soot load warning. The stronger level for bank 2, beyond which a normal regeneration may no longer be safe, is P243F, while ash build-up is reported separately. A long motorway drive or a workshop-initiated regeneration often clears it; repeated returns point to the cause behind the soot.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number4 / A3

Possible causes

  • Mostly short trips so passive and active regeneration cannot finish high
  • Excess soot from injectors, EGR or boost problems medium
  • Differential pressure sensor or hoses on bank 2 giving a false high reading medium

Symptoms

  • Particulate filter or engine warning lamp
  • Reduced power or slow response
  • Higher fuel consumption

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P24A3

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication