P2499
EGR Cooler Bypass Position Sensor Circuit Low (Bank 2)
P2499 stands for a bank 2 bypass position voltage that has fallen to the bottom of its range. No manufacturer documents the bank 2 code publicly. For orientation, GM's 2017 Duramax tables fail the bank 1 sensor (P2494) once its output drops under one percent of the supply and need 200 bad results out of 250 before the Type B fault is stored. A comparable bank 2 check would react to the same electrical causes: the signal wire grounded somewhere along the harness, the sensor supply interrupted or shorted, or a sensor that no longer drives its output. If other 5 V sensors report low values simultaneously, the shared reference circuit is the better starting point. High voltage on bank 2 is P249A, the bank 1 low code P2494.
Possible causes
- Bank 2 signal wire touching ground high
- 5 V sensor supply interrupted or pulled down medium
- Sensor output stage failed low
Symptoms
- Check engine light on
- Bank 2 bypass position reads near zero
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2499
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.