P2497
EGR Cooler Bypass Position Sensor Circuit (Bank 2)
P2497 is the generic circuit fault of the position sensor on the bank 2 cooler bypass, so it can only appear on engines whose second bank has its own EGR cooler with feedback-controlled flap. We found no manufacturer that documents a bank 2 bypass sensor; all published examples, such as GM's Duramax tables, are single-bank engines that use P2494 and P2495 on bank 1. The logic would be the same: the controller expects a voltage between fixed limits and flags the circuit when it is missing or implausible in a way not covered by the low and high codes. Bypass control on that bank is then usually suspended. A check of the connector, the 5 V supply and ground at the sensor comes first. The bank 1 equivalent is P2492.
Possible causes
- Damaged wiring to the bank 2 position sensor high
- Connector not latched or corroded medium
- Failed position sensor or bypass valve low
Symptoms
- Check engine light on
- Bypass on bank 2 no longer regulated
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2497
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.