P2493
EGR Cooler Bypass Position Sensor Range/Performance (Bank 1)
P2493 is a plausibility fault: the bank 1 bypass position signal stays inside its electrical limits, but its value or behaviour does not fit the commanded flap position or the learned end stops. GM names the code in preliminary bulletin PI1449 for the 2015 Silverado and Sierra with the LML Duramax, where it showed up together with P2495, P24C4 and P06A3. The fix there was a complete new bypass valve, since the sensor sits in the valve and must not be taken apart. Range errors often come from a worn sensor track, a shaft that turns without the sensor following, or deposits that shift the end positions. The pure circuit faults are P2492, P2494 and P2495; bank 2 reports P2498.
Possible causes
- Worn or defective bypass valve with integrated sensor high
- Deposits shifting the learned end positions medium
- Unstable 5 V reference shared with other sensors low
Symptoms
- Check engine light on, often with further bypass codes
- Bypass position in the live data does not match the command
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2493
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.