Powertrain
generic / SAE
P2487
Exhaust Gas Temperature Sensor Circuit High Bank 2 Sensor 5
Same as P242D on bank 2 sensor 5. Wiring faults of this kind typically come from chafing, water ingress at connector seals, or pin push-back — a wiggle test on the harness while the code is active often confirms the location.
SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number4 / 87
Possible causes
- Signal shorted to supply high
- Connector pins corroded - high contact resistance low
- Supply wire pinched against B+ source low
Inspection / repair
- Difficulty: medium
- DIY: possible
- Estimated cost: 120–400 €
- Estimated time: 0.6–1.8 h
- Component: egt sensor b2s5
- MIL / check engine light
- emissions-relevant
Sources
References
sae:J2012