P2486
Exhaust Gas Temperature Sensor Circuit Low (Bank 2 Sensor 5)
P2486 is set when the signal of the fifth bank 2 exhaust probe sits below its lower electrical limit, typically because the lead or the probe itself shorts to ground. No manufacturer documents P2486 publicly; it presupposes two exhaust banks with five probes each. As an analogy, GM's diesel tables handle bank 1 probe 5 under P2481 with a resistance limit of 158 to 500 Ω depending on the year (under 1 Ω in 2025) and a debounce of 10 of 20 samples, Type B. CARB calls for out-of-range low checks on every such input. In the workshop, measure the probe resistance cold and compare it with a probe of the same type, then look for chafed insulation along the exhaust. Opposite limit: P2487; bank 1: P2481.
Possible causes
- Lead insulation damaged and touching ground high
- Internal short of the probe medium
Symptoms
- Engine warning lamp
- Implausible reading of this probe
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2486
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.