OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2482

Exhaust Gas Temperature Sensor Circuit High (Bank 1 Sensor 5)

With P2482 the fifth bank 1 exhaust probe delivers a signal above its upper electrical limit. On GM diesels this code also covers the open circuit: the 2018 table sets it above 1400 Ω, both as a short to power with the driver off and as an interruption with the driver on, after 10 of 20 samples, Type B. The 2020 table makes it Type A. In 2025 GM uses more than 100 MΩ, or a digital value hotter than about 1290 °C, after 19 of 25 samples, again Type A with the lamp on after one trip. Ram names P2482 together with P2481 for its 2025–2026 heavy-duty diesel pick-ups. A loose plug or broken lead is therefore as likely as a failed probe. Compare with P2481 for the short to ground.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number4 / 82

Possible causes

  • Loose, corroded or unplugged connector high
  • Broken lead from heat or vibration medium
  • Probe element open or high-resistance medium

Symptoms

  • Warning lamp, on GM from 2020 after a single trip
  • Probe 5 shows a fixed extreme value
  • Regeneration suppressed

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2482

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication