OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2480

Exhaust Gas Temperature Sensor Circuit/Open (Bank 1 Sensor 5)

P2480 is the general circuit or open-circuit fault of a fifth exhaust temperature probe on bank 1. Five probes in one line are rare; GM's small diesels with oxidation catalyst, SCR, second catalyst and filter are among the few layouts that use them. GM does not report P2480 there, however: its 2018 tables detect an interrupted probe 5 inside P2482, by a resistance above 1400 Ω with the output energised, and the 2025 tables treat values beyond 100 MΩ the same way. So no maker documents P2480 publicly; CARB only requires that the circuit be monitored. Typical findings would be a broken lead, a corroded plug near the hot exhaust, or a probe whose element has burned through. Low and High faults of the same probe are P2481 and P2482.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number4 / 80

Possible causes

  • Broken or chafed lead to probe 5 high
  • Corroded or loose connector near the exhaust medium
  • Measuring element of the probe burned through medium

Symptoms

  • Warning lamp on
  • Missing or frozen value for probe 5 in live data
  • Filter regeneration may be suppressed

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2480

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication