OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P247F

Exhaust Gas Temperature Out of Range (Bank 2 Sensor 4)

P247F flags an unacceptable reading from the fourth exhaust temperature probe of bank 2, the position that on most layouts sits behind the particulate filter. A genuine reading near the limit there means heat is leaving the filter, which points to a runaway regeneration. No manufacturer documents P247F publicly. The bank 1 counterpart P247B appears only in Ford's 2015 diesel summary, which trips it once the probe exceeds roughly 1150 °C; by 2023 Ford checked probe 4 against a temperature model (P246E) instead. CARB demands range and rationality monitoring for such inputs. Before the probe is replaced, compare it with the bank 1 probe 4 and inspect the filter, because a cracked substrate can follow repeated overheating.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number4 / 7F

Possible causes

  • Overloaded particulate filter burning off too fast medium
  • Probe ageing with readings drifting upwards medium
  • Probe swapped with another position after a repair low

Symptoms

  • Engine warning lamp lit
  • Regeneration blocked or power limited

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P247F

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication