P247D
Exhaust Gas Temperature Out of Range (Bank 2 Sensor 2)
P247D applies to the second probe on bank 2, by analogy with P2479 normally downstream of that bank's oxidation catalyst, where the heat released by burning fuel during a regeneration is measured. It is set when the reported temperature leaves the plausible window, in practice mostly on the high side. There is no public maker document for P247D; the closest reference is Ford's 2015 diesel summary, which uses P2479 for the bank 1 position with a limit of about 1150 °C. CARB asks for out-of-range and rationality checks on such inputs. A one-sided hot reading on bank 2 often means that bank receives more fuel, while a probe that reads hot even when cold is simply faulty.
Possible causes
- Too much heat in the bank 2 catalyst during regeneration high
- Probe reading high even on a cold engine medium
- Leaking injector on bank 2 low
Symptoms
- MIL on
- Regeneration cancelled
- Bank 2 probe 2 differs from its bank 1 twin
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P247D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.