P247B
Exhaust Gas Temperature Out of Range (Bank 1 Sensor 4)
P247B concerns the last probe in the bank 1 chain. In Ford's 2015 6.7L overview that is EGT14, mounted downstream of the particulate filter, so it sees the heat that leaves the filter during regeneration. Ford's 2015 diesel summary is the only public maker document with this code; it pairs it with P2470 and P2471 and apply the same high-side limit of about 1150 °C, monitored continuously over some 2 s. The 2023 summary checks probe 4 against a model (P246E) instead. A real reading near the limit at the filter outlet hints at a thermal runaway in the filter, which can crack the substrate, so the vehicle should be inspected promptly.
Possible causes
- Thermal runaway in the particulate filter high
- Probe reading too high medium
- Unburnt fuel reaching the filter from injectors or a dosing valve low
Symptoms
- MIL on
- Regeneration stopped, filter load warning possible
- Power reduction
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P247B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.