P247A
Exhaust Gas Temperature Out of Range (Bank 1 Sensor 3)
P247A is the out-of-range verdict for the third bank 1 probe, which sits further down the aftertreatment line. It is the best documented code of this series. Volkswagen's 2014 quick-reference books for the 2.0L TDI CJAA (Golf, Beetle) compare the control deviation with an engine-speed and torque map, while the 3.0L TDI in the 2014 Touareg flags a gap between target and measured temperature above 200 K or below -100 K. Ford's 2015 diesel summary includes it with the high-side limit of about 1150 °C. A reading too high here often follows an uncontrolled soot burn in the filter, one too low a regeneration that never got hot enough.
Possible causes
- Overloaded particulate filter burning off too fast high
- Regeneration not reaching target temperature (VW low-side check) medium
- Probe aged and misreporting medium
Symptoms
- MIL on
- Filter regeneration aborted or repeated
- Emergency mode with reduced power possible
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P247A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.