P2479
Exhaust Gas Temperature Out of Range (Bank 1 Sensor 2)
P2479 applies the same temperature-limit idea to the second bank 1 probe. On the 2015 Ford 6.7L layout this is EGT12 at the oxidation catalyst outlet, where the exotherm of a regeneration shows up first, so a runaway burn or excessive post-injection can push the reading towards the limit. Ford's 2015 diesel summary lists P2479 alongside P2032 and P2033 and uses a high-side threshold of about 1150 °C; the 2023 edition no longer carries it. No other maker documents the code publicly. When the code appears together with circuit faults of the same probe, fix those first; on its own it calls for a check of injection and regeneration behaviour.
Possible causes
- Excessive heat during regeneration, e.g. too much post-injection high
- Leaking injector adding unburnt fuel to the catalyst medium
- Probe reading too high low
Symptoms
- MIL on
- Regeneration aborted
- Reduced power
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P2479
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.