OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2477

Exhaust Gas Temperature Sensor Circuit Intermittent/Erratic (Bank 2 Sensor 4)

P2477 targets a signal from bank 2 probe 4 that jumps around, while each individual sample may still be in range. Real exhaust temperature changes only gradually because the probe and pipe have thermal mass, so sudden steps between consecutive readings betray a wiring or contact issue. GM documents the method for the bank 1 sibling P2472: its 2017 diesel table counts samples with a resistance step above 10 ohms and fails at 15 of 30, as a Type B fault with the MIL on the second trip. P2477 itself appears in no public maker document. Faults tend to come and go with vibration or heat, so wiggling the harness while watching live data is the usual way to find them.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number4 / 77

Possible causes

  • Loose or corroded pins in the probe connector high
  • Wire strands breaking near the hot pipe medium
  • Cracked probe element with unstable contact low

Symptoms

  • MIL on after the second faulty trip
  • Value of bank 2 probe 4 jumps in live data
  • Fault code returns after being cleared

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2477

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication