OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2474

Exhaust Gas Temperature Sensor Circuit Range/Performance (Bank 2 Sensor 4)

P2474 flags a plausibility problem: the electrical signal of bank 2 probe 4 is valid, yet the temperature it reports does not fit what the engine controller expects. Typical tests compare the probe with its neighbours after a long soak, when all should read about ambient, or with a modelled value during driving. Ford handles the bank 1 analogue P246F as a sensor-to-sensor check on its single-bank diesels; for the second bank no maker publishes P2474. CARB requires rationality monitoring for exhaust temperature inputs that feed emission strategies. A skewed probe can start or block regeneration at the wrong time, so the driver may notice higher fuel use or a regeneration that never completes.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number4 / 74

Possible causes

  • Probe aged and reading off by a constant amount high
  • Soot-coated probe tip reacting slowly medium
  • Exhaust leak upstream of the probe falsifying the reading low

Symptoms

  • MIL on after repeated detection
  • Probe 4 of bank 2 differs clearly from the other probes after a cold soak
  • Regenerations incomplete or more frequent

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2474

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication