P2472
Exhaust Gas Temperature Sensor Circuit Intermittent/Erratic (Bank 1 Sensor 4)
P2472 reports that the last bank 1 temperature probe (sensor 4) changes its signal too abruptly between two readings, although each reading on its own lies in range. GM documents it as a quick-change monitor with a 100 ms task: the 2017 and 2018 diesel tables look at the resistance step between consecutive samples (more than 10 Ω) and fail after 15 of 30 samples, the 2025 tables use a temperature step above 100 °C with 12 of 25 samples; all are Type B, so the MIL waits for a second trip. Stellantis case S2625000003 names it next to P2470 and P2471 for the 2025 and 2026 heavy-duty Ram pickups. Ford's diesel summaries do not use this number. Corroded pins, loose terminals and fatigued wires near the hot pipe cause most cases. A probe that is steady but wrong is P246F.
Possible causes
- Loose or corroded terminal in the probe connector high
- Wire fatigue near the hot exhaust pipe medium
- Cracked sensing element giving unstable contact low
Symptoms
- MIL on after the second faulty trip
- Temperature value flickers in live data
- Fault comes and goes, often after rough roads
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2472
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.