P2471
Exhaust Gas Temperature Sensor Circuit High (Bank 1 Sensor 4)
P2471 is set when the fourth bank 1 exhaust temperature probe drives its input above the upper limit, the picture of an open circuit, an unplugged sensor or a short to voltage. Ford's diesels call more than 2.66 V a fault. GM checks both a short to power and an open driver circuit: above 900 Ω in the 2017 and 2020 tables, above 1,400 Ω in 2018, with 10 failed readings in 20; the 2020 and 2025 tables rate it Type A, so the MIL can come on in the first trip, and 2025 uses more than 100 MΩ or a digital reading above about 1,290 °C. Ram includes P2471 in case S2625000003 for 2025–2026 Ram 2500/3500 and points technicians to sensor names rather than numbers when locating the part. Start with the connector and a cold resistance check. Too low is P2470.
Possible causes
- Connector unplugged or wire broken (open circuit) high
- Sensing element burnt out medium
- Signal line shorted to a voltage source low
Symptoms
- MIL on, on GM possibly in the first trip
- Last exhaust probe shows maximum or substitute value
- Regeneration or DEF dosing inhibited
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2471
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.