OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2470

Exhaust Gas Temperature Sensor Circuit Low (Bank 1 Sensor 4)

P2470 means the signal of bank 1 probe number 4 has dropped below its valid floor, which on resistive probes indicates a short to ground. Ford's diesels flag a voltage under 0.10 V with the key on and 9 to 16.25 V supply, checked continuously over about 2 s. GM's diesel tables check whether the probe output stage is grounded: below 158 Ω in the 2017 and 2020 tables, below 500 Ω in 2018, and in the 2025 tables below 1 Ω or a digital reading under −72.8 °C after 19 of 25 samples, each time as a Type B fault. Ram lists P2470 for 2025–2026 Ram 2500/3500 in case S2625000003, which asks to check battery voltage before any exhaust sensor diagnosis. Chafed wiring at the exhaust and a shorted probe are the usual finds. Too high or open is P2471.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number4 / 70

Possible causes

  • Signal wire chafed through and touching ground high
  • Internal short inside the probe medium
  • Low battery voltage during diagnosis distorting readings (Ram) low

Symptoms

  • MIL on
  • Implausible value for the last exhaust probe
  • Regeneration or DEF dosing inhibited

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2470

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication