P246D
Particulate Filter Pressure Sensor A/B Correlation
P246D compares two pressure readings at the particulate filter that ought to agree under steady conditions. Which sensor is A and which is B is decided by each manufacturer. Ford's 2013 to 2015 diesel summaries use it as a rationality test between the filter pressure sensor DPFP and the delta pressure sensor DPS: with coolant above 70 °C, ambient pressure above 745 hPa, filter inlet temperature between 125 and 425 °C and exhaust flow of 200 to 600 kg/h, the code sets once the two differ by over 1.5 kPa, evaluated over about 2 s. Typical findings are swapped, kinked or leaking sensing hoses, water in a line or one sensor drifting while its circuit still passes. Pure electrical faults have their own codes (P2452 ff. and P245E ff.). With a doubtful pressure value the soot estimate and regeneration timing suffer.
Possible causes
- Sensing hoses swapped, kinked or leaking high
- Water or soot in a sensing line medium
- One pressure sensor drifting out of calibration medium
Symptoms
- MIL on
- Regeneration too early, too late or suspended
- Pressure values of the two sensors disagree in live data
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P246D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.