OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2469

Exhaust Gas Temperature Sensor Circuit High (Bank 2 Sensor 3)

P2469 is logged when bank 2 probe number 3 pushes its input above the permitted ceiling. An unplugged connector, a broken wire or a burnt-out sensing element produces exactly that, as does a signal line shorted to a voltage source. Public calibrations exist only for the sister inputs: Ford's 2023 diesels flag anything above 2.66 V, and GM's 2025 diesel tables treat an open-like resistance (beyond 100 MΩ) or a digital value hotter than roughly 1,290 °C as failed after 19 of 25 samples and rate it Type A, so the MIL comes on in the first trip. CARB requires that out-of-range highs on emission inputs are detected. Measure the probe resistance cold and check the plug before buying a sensor. A too-low signal is P2468, an erratic one P246A.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number4 / 69

Possible causes

  • Connector unplugged or wire broken (open circuit) high
  • Sensing element burnt out medium
  • Signal line shorted to a voltage source low

Symptoms

  • MIL on, often already in the first trip
  • Probe shows a maximum or invalid value
  • Regeneration or DEF dosing inhibited

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2469

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication