OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2468

Exhaust Gas Temperature Sensor Circuit Low (Bank 2 Sensor 3)

P2468 reports that probe 3 in the bank 2 exhaust line delivers a signal below the lowest value the input can produce with an intact circuit. With the usual resistive probes this nearly always means the signal line or the sensor itself has a ground short. No manufacturer lists this bank 2 code publicly; the neighbouring low codes show the scale. Ford's 2023 diesels treat anything below 0.10 V as a fault once ignition is on and supply lies between 9 and 16.25 V, judged within about 2 s, and GM's 2020 diesel tables flag a probe resistance below 158 Ω for sensor 4 as a Type B fault after 10 of 20 samples. CARB demands out-of-range checks for such inputs. Look for chafed insulation against the exhaust or a melted connector. The opposite fault, signal too high or open, is P2469.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number4 / 68

Possible causes

  • Signal wire chafed through and touching ground high
  • Internal short inside the probe medium
  • Connector melted or with water ingress low

Symptoms

  • MIL on
  • Probe shows an implausible value at a standstill
  • Regeneration or DEF dosing inhibited

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2468

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication