OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2467

Exhaust Gas Temperature Sensor Circuit Range/Performance (Bank 2 Sensor 3)

P2467 means the third exhaust temperature probe on bank 2 delivers an electrically valid signal that does not match the operating state. A public threshold for this exact code is not available. On bank 1, Ford's 2023 diesels test the matching probe after at least 6 h off by demanding it stays within 50 °C of three other sensors, which reveals a probe that is stuck or out of position. Ford also names P2467 in special service message 48345 for Escape, Edge, Corsair and Nautilus of model years 2019–2020 with the 2.0 L EcoBoost, where coolant leaking from the EGR cooler into the exhaust can set it next to P0217 and P0401; the cooler is to be inspected and pressure-tested first. CARB requires such rationality checks on emission inputs. Wiring faults belong to P2466 and P2468 to P246A.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number4 / 67

Possible causes

  • Probe aged, drifting or frozen at one value high
  • Probe loose or pulled out of the gas stream medium
  • Coolant entering the exhaust through a leaking EGR cooler (Ford 2.0 L EcoBoost) medium
  • Controller software judging the probe too strictly low

Symptoms

  • MIL on
  • Temperature value lags or deviates from neighbouring probes
  • White smoke and coolant loss if the EGR cooler leaks

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2467

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication