P2466
Exhaust Gas Temperature Sensor Circuit (Bank 2 Sensor 3)
P2466 is the general circuit code for the third exhaust temperature probe in the bank 2 exhaust path, so it only appears on engines with two separate aftertreatment lines. No manufacturer documents this exact code publicly. The bank 1 counterpart P242A shows how makers fill such a general code: Ford's 2023 diesels use it for a probe that departs more than 80 °C from its modelled value for 20 s, while other makers attach open-circuit detection to it. CARB requires every emission-relevant sensor to be checked for circuit continuity and plausibility. Expect the controller to distrust the reading, to pause regeneration or DEF dosing that relies on it and to light the MIL. Clear low and high signal faults of this probe go to P2468 and P2469 instead.
Possible causes
- Temperature probe failed internally or open high
- Connector or wiring near the exhaust damaged by heat medium
- Probe loose or not reaching into the gas stream low
Symptoms
- MIL on
- Implausible or missing value for this probe in live data
- Filter regeneration or DEF dosing suspended
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2466
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.