P2461
Particulate Filter Pressure Sensor B Circuit High
When pressure sensor B reports a voltage above its usable range, P2461 is stored. Ford sets the limit at 4.90 V for 2 s on the 2013 6.7 L diesel, where B is the differential sensor across the filter, and at 4.73 V for 5 s on the 2024 gasoline particulate filters. An open ground, a signal wire touching the 5 V reference or a battery feed, or a failed sensor are the classic electrical reasons. A Stellantis case from 2025 on the 2023 Jeep Renegade shows a different trigger: condensate inside the tubes between exhaust and differential pressure sensor gave false readings and set P2461 together with P2453 and P2455. The fix there was to dry the hoses with compressed air blown toward the filter, never into the sensor. Because the reading looks like a very full filter, the engine may limit power. The low counterpart is P2460.
Possible causes
- Condensate in the sensor tubes producing false high readings high
- Sensor ground open or signal shorted to reference or battery voltage medium
- Sensor B internally failed with output stuck high medium
Symptoms
- Malfunction indicator lamp on
- Reduced power because the filter appears heavily loaded
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P2461
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.