P245E
Particulate Filter Pressure Sensor B Circuit
Which sensor is B depends on the maker. Ford's 2013 6.7 L Power Stroke has an exhaust pressure sensor ahead of the filter as A and a two-port differential sensor across it as B. Despite its circuit title, P245E is there an offset test during after-run, with the key off and the controller still awake: since no gas flows, the differential reading should be zero, and more than 1 kPa for one second sets the code. On Ford's 2024 gasoline particulate filters with digital SENT sensors, P245E is the general circuit fault, detected within 5 s, while lost communication with the same sensor is U0602. So a sensor that drifted, a hose still holding pressure or water inside the sensor can set it as easily as a wiring fault. Low and high signals have their own codes, P2460 and P2461, and erratic signals P2462.
Possible causes
- Sensor B offset drifted or moisture inside the sensor high
- Pressure hose kinked or blocked so pressure is trapped medium
- Wiring or connector fault on the sensor B circuit medium
Symptoms
- Malfunction indicator lamp on
- Soot load estimate unreliable, regeneration timing affected
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P245E
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.