OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P245D

EGR Cooler Bypass Control Circuit High (Bank 1)

P245D is the short-to-supply case of the bank 1 bypass circuit. For the Duramax with a DC-motor bypass, GM's 2017 tables watch the current through the H-bridge while it drives the flap: more than 8 A in 160 of 200 samples sets a Type B fault. On the vacuum-switched version the check looks at resistance to the supply side, and the 2014 tables describe high voltage while the driver is on. Ram issued a PCM software update in 2025 for 2024 heavy-duty pickups with the 6.7 L Cummins that set P245D, together with other air handling codes, to remove false actuator faults, so the software level should be checked before the harness is opened. In a genuine case a wire touching a battery feed or an actuator with a low-resistance winding is found. Open circuit is P245A, short to ground P245C, bank 2 is P2491.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number4 / 5D

Possible causes

  • Control software reporting a false actuator fault (known on some Ram diesels) medium
  • Control wire shorted to a battery or ignition feed medium
  • Actuator motor drawing excessive current (low-resistance winding, binding) medium

Symptoms

  • Malfunction indicator lamp on
  • Bypass actuator switched off by the controller and left in default position

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P245D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication