OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P244F

Exhaust Temperature Too High For Particulate Filter Regeneration (Bank 2)

The bank 2 counterpart of P244D: during a filter burn the second bank's exhaust gets hotter than the substrate tolerates. No manufacturer documents P244F publicly. The bank 1 version appears in GM's 2011 Duramax tables as a catalyst overtemperature during regeneration, and Ram links P244D on current Cummins trucks to exhaust temperature sensor faults, so a wrong sensor reading deserves suspicion before the hardware. On a real overheat the usual trigger is surplus fuel on that bank, from a dripping injector or a filter that was allowed to load up far too much before the burn started. The controller ends the regeneration, may reduce power and will retry later. Because overheating can crack the filter, a code that keeps returning should be diagnosed rather than repeatedly cleared. Too little heat on bank 2 is P244E.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number4 / 4F

Possible causes

  • Surplus fuel on bank 2 from a leaking injector high
  • Bank 2 exhaust temperature sensor or wiring reading too high medium
  • Bank 2 filter heavily overloaded before the burn medium

Symptoms

  • Malfunction indicator lamp on
  • Regeneration stopped, possibly reduced power

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P244F

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication